Termination w.r.t. Q proof of /tmp/tmpz1M3uh/PEANO_nosorts

Termination w.r.t. Q of the following Term Rewriting System could be proven:

Q restricted rewrite system:
The TRS R consists of the following rules:

active(and(tt, X)) → mark(X)
active(plus(N, 0)) → mark(N)
active(plus(N, s(M))) → mark(s(plus(N, M)))
active(and(X1, X2)) → and(active(X1), X2)
active(plus(X1, X2)) → plus(active(X1), X2)
active(plus(X1, X2)) → plus(X1, active(X2))
active(s(X)) → s(active(X))
and(mark(X1), X2) → mark(and(X1, X2))
plus(mark(X1), X2) → mark(plus(X1, X2))
plus(X1, mark(X2)) → mark(plus(X1, X2))
s(mark(X)) → mark(s(X))
proper(and(X1, X2)) → and(proper(X1), proper(X2))
proper(tt) → ok(tt)
proper(plus(X1, X2)) → plus(proper(X1), proper(X2))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
and(ok(X1), ok(X2)) → ok(and(X1, X2))
plus(ok(X1), ok(X2)) → ok(plus(X1, X2))
s(ok(X)) → ok(s(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.

↳ QTRS

  ↳ RRRPoloQTRSProof

Q restricted rewrite system:
The TRS R consists of the following rules:

active(and(tt, X)) → mark(X)
active(plus(N, 0)) → mark(N)
active(plus(N, s(M))) → mark(s(plus(N, M)))
active(and(X1, X2)) → and(active(X1), X2)
active(plus(X1, X2)) → plus(active(X1), X2)
active(plus(X1, X2)) → plus(X1, active(X2))
active(s(X)) → s(active(X))
and(mark(X1), X2) → mark(and(X1, X2))
plus(mark(X1), X2) → mark(plus(X1, X2))
plus(X1, mark(X2)) → mark(plus(X1, X2))
s(mark(X)) → mark(s(X))
proper(and(X1, X2)) → and(proper(X1), proper(X2))
proper(tt) → ok(tt)
proper(plus(X1, X2)) → plus(proper(X1), proper(X2))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
and(ok(X1), ok(X2)) → ok(and(X1, X2))
plus(ok(X1), ok(X2)) → ok(plus(X1, X2))
s(ok(X)) → ok(s(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.

The following Q TRS is given: Q restricted rewrite system:
The TRS R consists of the following rules:

active(and(tt, X)) → mark(X)
active(plus(N, 0)) → mark(N)
active(plus(N, s(M))) → mark(s(plus(N, M)))
active(and(X1, X2)) → and(active(X1), X2)
active(plus(X1, X2)) → plus(active(X1), X2)
active(plus(X1, X2)) → plus(X1, active(X2))
active(s(X)) → s(active(X))
and(mark(X1), X2) → mark(and(X1, X2))
plus(mark(X1), X2) → mark(plus(X1, X2))
plus(X1, mark(X2)) → mark(plus(X1, X2))
s(mark(X)) → mark(s(X))
proper(and(X1, X2)) → and(proper(X1), proper(X2))
proper(tt) → ok(tt)
proper(plus(X1, X2)) → plus(proper(X1), proper(X2))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
and(ok(X1), ok(X2)) → ok(and(X1, X2))
plus(ok(X1), ok(X2)) → ok(plus(X1, X2))
s(ok(X)) → ok(s(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
The following rules can be removed by the rule removal processor [15] because they are oriented strictly by a polynomial ordering:

active(and(tt, X)) → mark(X)

Used ordering:
Polynomial interpretation [25]:

POL(0) = 0
POL(active(x₁)) = x₁
POL(and(x₁, x₂)) = 1 + 2·x₁ + x₂
POL(mark(x₁)) = x₁
POL(ok(x₁)) = x₁
POL(plus(x₁, x₂)) = x₁ + x₂
POL(proper(x₁)) = x₁
POL(s(x₁)) = x₁
POL(top(x₁)) = x₁
POL(tt) = 0

↳ QTRS

  ↳ RRRPoloQTRSProof

    ↳ QTRS

      ↳ RRRPoloQTRSProof

Q restricted rewrite system:
The TRS R consists of the following rules:

active(plus(N, 0)) → mark(N)
active(plus(N, s(M))) → mark(s(plus(N, M)))
active(and(X1, X2)) → and(active(X1), X2)
active(plus(X1, X2)) → plus(active(X1), X2)
active(plus(X1, X2)) → plus(X1, active(X2))
active(s(X)) → s(active(X))
and(mark(X1), X2) → mark(and(X1, X2))
plus(mark(X1), X2) → mark(plus(X1, X2))
plus(X1, mark(X2)) → mark(plus(X1, X2))
s(mark(X)) → mark(s(X))
proper(and(X1, X2)) → and(proper(X1), proper(X2))
proper(tt) → ok(tt)
proper(plus(X1, X2)) → plus(proper(X1), proper(X2))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
and(ok(X1), ok(X2)) → ok(and(X1, X2))
plus(ok(X1), ok(X2)) → ok(plus(X1, X2))
s(ok(X)) → ok(s(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.

The following Q TRS is given: Q restricted rewrite system:
The TRS R consists of the following rules:

active(plus(N, 0)) → mark(N)
active(plus(N, s(M))) → mark(s(plus(N, M)))
active(and(X1, X2)) → and(active(X1), X2)
active(plus(X1, X2)) → plus(active(X1), X2)
active(plus(X1, X2)) → plus(X1, active(X2))
active(s(X)) → s(active(X))
and(mark(X1), X2) → mark(and(X1, X2))
plus(mark(X1), X2) → mark(plus(X1, X2))
plus(X1, mark(X2)) → mark(plus(X1, X2))
s(mark(X)) → mark(s(X))
proper(and(X1, X2)) → and(proper(X1), proper(X2))
proper(tt) → ok(tt)
proper(plus(X1, X2)) → plus(proper(X1), proper(X2))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
and(ok(X1), ok(X2)) → ok(and(X1, X2))
plus(ok(X1), ok(X2)) → ok(plus(X1, X2))
s(ok(X)) → ok(s(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
The following rules can be removed by the rule removal processor [15] because they are oriented strictly by a polynomial ordering:

active(plus(N, 0)) → mark(N)

Used ordering:
Polynomial interpretation [25]:

POL(0) = 1
POL(active(x₁)) = x₁
POL(and(x₁, x₂)) = x₁ + 2·x₂
POL(mark(x₁)) = x₁
POL(ok(x₁)) = x₁
POL(plus(x₁, x₂)) = x₁ + x₂
POL(proper(x₁)) = x₁
POL(s(x₁)) = x₁
POL(top(x₁)) = 2·x₁
POL(tt) = 0

↳ QTRS

  ↳ RRRPoloQTRSProof

    ↳ QTRS

      ↳ RRRPoloQTRSProof

        ↳ QTRS

          ↳ RRRPoloQTRSProof

Q restricted rewrite system:
The TRS R consists of the following rules:

active(plus(N, s(M))) → mark(s(plus(N, M)))
active(and(X1, X2)) → and(active(X1), X2)
active(plus(X1, X2)) → plus(active(X1), X2)
active(plus(X1, X2)) → plus(X1, active(X2))
active(s(X)) → s(active(X))
and(mark(X1), X2) → mark(and(X1, X2))
plus(mark(X1), X2) → mark(plus(X1, X2))
plus(X1, mark(X2)) → mark(plus(X1, X2))
s(mark(X)) → mark(s(X))
proper(and(X1, X2)) → and(proper(X1), proper(X2))
proper(tt) → ok(tt)
proper(plus(X1, X2)) → plus(proper(X1), proper(X2))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
and(ok(X1), ok(X2)) → ok(and(X1, X2))
plus(ok(X1), ok(X2)) → ok(plus(X1, X2))
s(ok(X)) → ok(s(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.

The following Q TRS is given: Q restricted rewrite system:
The TRS R consists of the following rules:

active(plus(N, s(M))) → mark(s(plus(N, M)))
active(and(X1, X2)) → and(active(X1), X2)
active(plus(X1, X2)) → plus(active(X1), X2)
active(plus(X1, X2)) → plus(X1, active(X2))
active(s(X)) → s(active(X))
and(mark(X1), X2) → mark(and(X1, X2))
plus(mark(X1), X2) → mark(plus(X1, X2))
plus(X1, mark(X2)) → mark(plus(X1, X2))
s(mark(X)) → mark(s(X))
proper(and(X1, X2)) → and(proper(X1), proper(X2))
proper(tt) → ok(tt)
proper(plus(X1, X2)) → plus(proper(X1), proper(X2))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
and(ok(X1), ok(X2)) → ok(and(X1, X2))
plus(ok(X1), ok(X2)) → ok(plus(X1, X2))
s(ok(X)) → ok(s(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
The following rules can be removed by the rule removal processor [15] because they are oriented strictly by a polynomial ordering:

active(plus(N, s(M))) → mark(s(plus(N, M)))

Used ordering:
Polynomial interpretation [25]:

POL(0) = 0
POL(active(x₁)) = x₁
POL(and(x₁, x₂)) = x₁ + x₂
POL(mark(x₁)) = x₁
POL(ok(x₁)) = x₁
POL(plus(x₁, x₂)) = x₁ + 2·x₂
POL(proper(x₁)) = x₁
POL(s(x₁)) = 1 + x₁
POL(top(x₁)) = x₁
POL(tt) = 0

↳ QTRS

  ↳ RRRPoloQTRSProof

    ↳ QTRS

      ↳ RRRPoloQTRSProof

        ↳ QTRS

          ↳ RRRPoloQTRSProof

            ↳ QTRS

              ↳ RRRPoloQTRSProof

Q restricted rewrite system:
The TRS R consists of the following rules:

active(and(X1, X2)) → and(active(X1), X2)
active(plus(X1, X2)) → plus(active(X1), X2)
active(plus(X1, X2)) → plus(X1, active(X2))
active(s(X)) → s(active(X))
and(mark(X1), X2) → mark(and(X1, X2))
plus(mark(X1), X2) → mark(plus(X1, X2))
plus(X1, mark(X2)) → mark(plus(X1, X2))
s(mark(X)) → mark(s(X))
proper(and(X1, X2)) → and(proper(X1), proper(X2))
proper(tt) → ok(tt)
proper(plus(X1, X2)) → plus(proper(X1), proper(X2))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
and(ok(X1), ok(X2)) → ok(and(X1, X2))
plus(ok(X1), ok(X2)) → ok(plus(X1, X2))
s(ok(X)) → ok(s(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.

The following Q TRS is given: Q restricted rewrite system:
The TRS R consists of the following rules:

active(and(X1, X2)) → and(active(X1), X2)
active(plus(X1, X2)) → plus(active(X1), X2)
active(plus(X1, X2)) → plus(X1, active(X2))
active(s(X)) → s(active(X))
and(mark(X1), X2) → mark(and(X1, X2))
plus(mark(X1), X2) → mark(plus(X1, X2))
plus(X1, mark(X2)) → mark(plus(X1, X2))
s(mark(X)) → mark(s(X))
proper(and(X1, X2)) → and(proper(X1), proper(X2))
proper(tt) → ok(tt)
proper(plus(X1, X2)) → plus(proper(X1), proper(X2))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
and(ok(X1), ok(X2)) → ok(and(X1, X2))
plus(ok(X1), ok(X2)) → ok(plus(X1, X2))
s(ok(X)) → ok(s(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
The following rules can be removed by the rule removal processor [15] because they are oriented strictly by a polynomial ordering:

and(mark(X1), X2) → mark(and(X1, X2))
plus(mark(X1), X2) → mark(plus(X1, X2))
top(mark(X)) → top(proper(X))

Used ordering:
Polynomial interpretation [25]:

POL(0) = 0
POL(active(x₁)) = 2·x₁
POL(and(x₁, x₂)) = 2·x₁ + x₂
POL(mark(x₁)) = 1 + x₁
POL(ok(x₁)) = 2·x₁
POL(plus(x₁, x₂)) = 2·x₁ + x₂
POL(proper(x₁)) = x₁
POL(s(x₁)) = x₁
POL(top(x₁)) = x₁
POL(tt) = 0

↳ QTRS

  ↳ RRRPoloQTRSProof

    ↳ QTRS

      ↳ RRRPoloQTRSProof

        ↳ QTRS

          ↳ RRRPoloQTRSProof

            ↳ QTRS

              ↳ RRRPoloQTRSProof

                ↳ QTRS

                  ↳ RRRPoloQTRSProof

Q restricted rewrite system:
The TRS R consists of the following rules:

active(and(X1, X2)) → and(active(X1), X2)
active(plus(X1, X2)) → plus(active(X1), X2)
active(plus(X1, X2)) → plus(X1, active(X2))
active(s(X)) → s(active(X))
plus(X1, mark(X2)) → mark(plus(X1, X2))
s(mark(X)) → mark(s(X))
proper(and(X1, X2)) → and(proper(X1), proper(X2))
proper(tt) → ok(tt)
proper(plus(X1, X2)) → plus(proper(X1), proper(X2))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
and(ok(X1), ok(X2)) → ok(and(X1, X2))
plus(ok(X1), ok(X2)) → ok(plus(X1, X2))
s(ok(X)) → ok(s(X))
top(ok(X)) → top(active(X))

Q is empty.

The following Q TRS is given: Q restricted rewrite system:
The TRS R consists of the following rules:

active(and(X1, X2)) → and(active(X1), X2)
active(plus(X1, X2)) → plus(active(X1), X2)
active(plus(X1, X2)) → plus(X1, active(X2))
active(s(X)) → s(active(X))
plus(X1, mark(X2)) → mark(plus(X1, X2))
s(mark(X)) → mark(s(X))
proper(and(X1, X2)) → and(proper(X1), proper(X2))
proper(tt) → ok(tt)
proper(plus(X1, X2)) → plus(proper(X1), proper(X2))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
and(ok(X1), ok(X2)) → ok(and(X1, X2))
plus(ok(X1), ok(X2)) → ok(plus(X1, X2))
s(ok(X)) → ok(s(X))
top(ok(X)) → top(active(X))

Q is empty.
The following rules can be removed by the rule removal processor [15] because they are oriented strictly by a polynomial ordering:

plus(X1, mark(X2)) → mark(plus(X1, X2))

Used ordering:
Polynomial interpretation [25]:

POL(0) = 0
POL(active(x₁)) = x₁
POL(and(x₁, x₂)) = x₁ + x₂
POL(mark(x₁)) = 1 + x₁
POL(ok(x₁)) = x₁
POL(plus(x₁, x₂)) = 2 + 2·x₁ + 2·x₂
POL(proper(x₁)) = x₁
POL(s(x₁)) = x₁
POL(top(x₁)) = 2·x₁
POL(tt) = 1

↳ QTRS

  ↳ RRRPoloQTRSProof

    ↳ QTRS

      ↳ RRRPoloQTRSProof

        ↳ QTRS

          ↳ RRRPoloQTRSProof

            ↳ QTRS

              ↳ RRRPoloQTRSProof

                ↳ QTRS

                  ↳ RRRPoloQTRSProof

                    ↳ QTRS

                      ↳ RRRPoloQTRSProof

Q restricted rewrite system:
The TRS R consists of the following rules:

active(and(X1, X2)) → and(active(X1), X2)
active(plus(X1, X2)) → plus(active(X1), X2)
active(plus(X1, X2)) → plus(X1, active(X2))
active(s(X)) → s(active(X))
s(mark(X)) → mark(s(X))
proper(and(X1, X2)) → and(proper(X1), proper(X2))
proper(tt) → ok(tt)
proper(plus(X1, X2)) → plus(proper(X1), proper(X2))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
and(ok(X1), ok(X2)) → ok(and(X1, X2))
plus(ok(X1), ok(X2)) → ok(plus(X1, X2))
s(ok(X)) → ok(s(X))
top(ok(X)) → top(active(X))

Q is empty.

The following Q TRS is given: Q restricted rewrite system:
The TRS R consists of the following rules:

active(and(X1, X2)) → and(active(X1), X2)
active(plus(X1, X2)) → plus(active(X1), X2)
active(plus(X1, X2)) → plus(X1, active(X2))
active(s(X)) → s(active(X))
s(mark(X)) → mark(s(X))
proper(and(X1, X2)) → and(proper(X1), proper(X2))
proper(tt) → ok(tt)
proper(plus(X1, X2)) → plus(proper(X1), proper(X2))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
and(ok(X1), ok(X2)) → ok(and(X1, X2))
plus(ok(X1), ok(X2)) → ok(plus(X1, X2))
s(ok(X)) → ok(s(X))
top(ok(X)) → top(active(X))

Q is empty.
The following rules can be removed by the rule removal processor [15] because they are oriented strictly by a polynomial ordering:

s(mark(X)) → mark(s(X))

Used ordering:
Polynomial interpretation [25]:

POL(0) = 0
POL(active(x₁)) = x₁
POL(and(x₁, x₂)) = 2·x₁ + x₂
POL(mark(x₁)) = 2 + 2·x₁
POL(ok(x₁)) = x₁
POL(plus(x₁, x₂)) = 2 + x₁ + 2·x₂
POL(proper(x₁)) = x₁
POL(s(x₁)) = 2·x₁
POL(top(x₁)) = 2·x₁
POL(tt) = 0

↳ QTRS

  ↳ RRRPoloQTRSProof

    ↳ QTRS

      ↳ RRRPoloQTRSProof

        ↳ QTRS

          ↳ RRRPoloQTRSProof

            ↳ QTRS

              ↳ RRRPoloQTRSProof

                ↳ QTRS

                  ↳ RRRPoloQTRSProof

                    ↳ QTRS

                      ↳ RRRPoloQTRSProof

                        ↳ QTRS

                          ↳ RRRPoloQTRSProof

Q restricted rewrite system:
The TRS R consists of the following rules:

active(and(X1, X2)) → and(active(X1), X2)
active(plus(X1, X2)) → plus(active(X1), X2)
active(plus(X1, X2)) → plus(X1, active(X2))
active(s(X)) → s(active(X))
proper(and(X1, X2)) → and(proper(X1), proper(X2))
proper(tt) → ok(tt)
proper(plus(X1, X2)) → plus(proper(X1), proper(X2))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
and(ok(X1), ok(X2)) → ok(and(X1, X2))
plus(ok(X1), ok(X2)) → ok(plus(X1, X2))
s(ok(X)) → ok(s(X))
top(ok(X)) → top(active(X))

Q is empty.

The following Q TRS is given: Q restricted rewrite system:
The TRS R consists of the following rules:

active(and(X1, X2)) → and(active(X1), X2)
active(plus(X1, X2)) → plus(active(X1), X2)
active(plus(X1, X2)) → plus(X1, active(X2))
active(s(X)) → s(active(X))
proper(and(X1, X2)) → and(proper(X1), proper(X2))
proper(tt) → ok(tt)
proper(plus(X1, X2)) → plus(proper(X1), proper(X2))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
and(ok(X1), ok(X2)) → ok(and(X1, X2))
plus(ok(X1), ok(X2)) → ok(plus(X1, X2))
s(ok(X)) → ok(s(X))
top(ok(X)) → top(active(X))

Q is empty.
The following rules can be removed by the rule removal processor [15] because they are oriented strictly by a polynomial ordering:

proper(and(X1, X2)) → and(proper(X1), proper(X2))
proper(tt) → ok(tt)
proper(plus(X1, X2)) → plus(proper(X1), proper(X2))

Used ordering:
Polynomial interpretation [25]:

POL(0) = 0
POL(active(x₁)) = x₁
POL(and(x₁, x₂)) = 2 + 2·x₁ + x₂
POL(ok(x₁)) = x₁
POL(plus(x₁, x₂)) = 1 + x₁ + 2·x₂
POL(proper(x₁)) = 2·x₁
POL(s(x₁)) = x₁
POL(top(x₁)) = 2·x₁
POL(tt) = 1

↳ QTRS

  ↳ RRRPoloQTRSProof

    ↳ QTRS

      ↳ RRRPoloQTRSProof

        ↳ QTRS

          ↳ RRRPoloQTRSProof

            ↳ QTRS

              ↳ RRRPoloQTRSProof

                ↳ QTRS

                  ↳ RRRPoloQTRSProof

                    ↳ QTRS

                      ↳ RRRPoloQTRSProof

                        ↳ QTRS

                          ↳ RRRPoloQTRSProof

                            ↳ QTRS

                              ↳ RRRPoloQTRSProof

Q restricted rewrite system:
The TRS R consists of the following rules:

active(and(X1, X2)) → and(active(X1), X2)
active(plus(X1, X2)) → plus(active(X1), X2)
active(plus(X1, X2)) → plus(X1, active(X2))
active(s(X)) → s(active(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
and(ok(X1), ok(X2)) → ok(and(X1, X2))
plus(ok(X1), ok(X2)) → ok(plus(X1, X2))
s(ok(X)) → ok(s(X))
top(ok(X)) → top(active(X))

Q is empty.

The following Q TRS is given: Q restricted rewrite system:
The TRS R consists of the following rules:

active(and(X1, X2)) → and(active(X1), X2)
active(plus(X1, X2)) → plus(active(X1), X2)
active(plus(X1, X2)) → plus(X1, active(X2))
active(s(X)) → s(active(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
and(ok(X1), ok(X2)) → ok(and(X1, X2))
plus(ok(X1), ok(X2)) → ok(plus(X1, X2))
s(ok(X)) → ok(s(X))
top(ok(X)) → top(active(X))

Q is empty.
The following rules can be removed by the rule removal processor [15] because they are oriented strictly by a polynomial ordering:

and(ok(X1), ok(X2)) → ok(and(X1, X2))
plus(ok(X1), ok(X2)) → ok(plus(X1, X2))
top(ok(X)) → top(active(X))

Used ordering:
Polynomial interpretation [25]:

POL(0) = 0
POL(active(x₁)) = 1 + 2·x₁
POL(and(x₁, x₂)) = x₁ + 2·x₂
POL(ok(x₁)) = 2 + 2·x₁
POL(plus(x₁, x₂)) = 1 + 2·x₁ + 2·x₂
POL(proper(x₁)) = 2 + x₁
POL(s(x₁)) = x₁
POL(top(x₁)) = x₁

↳ QTRS

  ↳ RRRPoloQTRSProof

    ↳ QTRS

      ↳ RRRPoloQTRSProof

        ↳ QTRS

          ↳ RRRPoloQTRSProof

            ↳ QTRS

              ↳ RRRPoloQTRSProof

                ↳ QTRS

                  ↳ RRRPoloQTRSProof

                    ↳ QTRS

                      ↳ RRRPoloQTRSProof

                        ↳ QTRS

                          ↳ RRRPoloQTRSProof

                            ↳ QTRS

                              ↳ RRRPoloQTRSProof

                                ↳ QTRS

                                  ↳ RRRPoloQTRSProof

Q restricted rewrite system:
The TRS R consists of the following rules:

active(and(X1, X2)) → and(active(X1), X2)
active(plus(X1, X2)) → plus(active(X1), X2)
active(plus(X1, X2)) → plus(X1, active(X2))
active(s(X)) → s(active(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
s(ok(X)) → ok(s(X))

Q is empty.

The following Q TRS is given: Q restricted rewrite system:
The TRS R consists of the following rules:

active(and(X1, X2)) → and(active(X1), X2)
active(plus(X1, X2)) → plus(active(X1), X2)
active(plus(X1, X2)) → plus(X1, active(X2))
active(s(X)) → s(active(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
s(ok(X)) → ok(s(X))

Q is empty.
The following rules can be removed by the rule removal processor [15] because they are oriented strictly by a polynomial ordering:

active(and(X1, X2)) → and(active(X1), X2)
active(plus(X1, X2)) → plus(active(X1), X2)
active(plus(X1, X2)) → plus(X1, active(X2))
active(s(X)) → s(active(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
s(ok(X)) → ok(s(X))

Used ordering:
Polynomial interpretation [25]:

POL(0) = 1
POL(active(x₁)) = 1 + 2·x₁
POL(and(x₁, x₂)) = 1 + x₁ + x₂
POL(ok(x₁)) = 1 + x₁
POL(plus(x₁, x₂)) = 1 + x₁ + x₂
POL(proper(x₁)) = 1 + 2·x₁
POL(s(x₁)) = 2 + 2·x₁

↳ QTRS

  ↳ RRRPoloQTRSProof

    ↳ QTRS

      ↳ RRRPoloQTRSProof

        ↳ QTRS

          ↳ RRRPoloQTRSProof

            ↳ QTRS

              ↳ RRRPoloQTRSProof

                ↳ QTRS

                  ↳ RRRPoloQTRSProof

                    ↳ QTRS

                      ↳ RRRPoloQTRSProof

                        ↳ QTRS

                          ↳ RRRPoloQTRSProof

                            ↳ QTRS

                              ↳ RRRPoloQTRSProof

                                ↳ QTRS

                                  ↳ RRRPoloQTRSProof

                                    ↳ QTRS

                                      ↳ RisEmptyProof

Q restricted rewrite system:
R is empty.
Q is empty.

The TRS R is empty. Hence, termination is trivially proven.